|
|
Research on calibration methods of transmission visibility meter |
Huang Chengdong1, Li Wei2, Liu Ruiliang1, Shen Ye1 |
1.No.95871 Unit of PLA,Hengyang 421002; 2.EAAF Institute of Aeronautical Meteorology,Beijing 100085; |
|
|
Abstract According to the research on the measuring theory and calibration methods of transmission visibility meter,combined with actual situation that the visibility value measured by the visual is higher than the instrument,this paper suggests that the calibration value should be chose which is a little bit of larger than visual value within a reasonable range when it is using transmission visibility meter.Avoiding as far as possible the deviation of a given Standard Value falls into the negative deviation interval in order to reduce the visibility measurement errors.Meanwhile,it could make the visibility measurement by the instrument getting closer to the visual measurement and making more practical significance for visibility measurement.
|
Received: 27 April 2017
|
|
|
|
|
[1] |
GRABNER M,KVICERA V.On the Relation between Atmospheric Visibility and Optical Wave Attenuation[C]// Mobile and Wireless Communications Summit.IEEE,2007:1-5.
|
[2] |
BAO H Y,WANG T Y.Enhanced fiber-optic temperature sensor for coupler visibility monitoring[J].Journal of Optoelectronics Laser,2005,16(12):1413-1416.
|
[3] |
WMO.Guide to Meteorological Instruments and Methods of Observation[M].6rd ed.Geneva:WMO,1996.
|
[4] |
GURLIT W,BOVENSMANN H,et al.The UV-A and visible solar irradiance spectrum:inter-comparison of absolutely calibrated,spectrally medium resolution solar irradiance spectra from balloon- and satellite-borne measurements[J].Atmospheric Chemistry & Physics,2004,4(6):8439-8469.
|
[5] |
杨玉霞,胡雪红.PWD20能见度仪及与目测能见度对比分析[J].兰州大学学报(自然科学版),2009,45(S1):61-63.
|
|
|
|