基于风洞实验的润滑剂对FP201型流速仪影响分析

Abstract
Figure/Table
References
Related Citation (3)

Download: HTML (1 KB)
Export: BibTeX | EndNote (RIS)

Abstract This paper uses a wind tunnel to create a stable wind environment and an experiment is done to the current meter in the air,which could separately measure the average flow rate of current meter in three situations:no lubricant,ceramic wax lubricant and L-AN7 lubricant.Comparing the results of experiment,it discovers the average flow rate of current meter is minimum without lubricant and the measurement performance is the worst.The situation is better to use ceramic wax lubricant.The average flow rate is maximum in using L-AN7 lubricant and the measurement performance is the best.This experiment result shows that it is necessary to use lubricant for FP current meter,and using L-AN7 lubricant as the lubricant can improve the measurement performance of the current meter.

Key words： FP201 current meter rotating-element current meter wind tunnel lubricant experiment research

Received: 31 October 2018

ZTFLH:

P335

	Service

	E-mail this article
	Add to my bookshelf
	Add to citation manager
	E-mail Alert
	RSS
	Articles by authors
	Yang Huibing
	Ye Song
	Shao Guanqing
	Fu Yuan

Cite this article:

Yang Huibing,Ye Song,Shao Guanqing等. Influence of lubricant on FP201 current meter based on wind tunnel experiment[J]. Meteorological Hydrological and Marine Instrument, 2019, 36(2): 60-64.

URL:

http://www.qxswhy.com/EN/ OR http://www.qxswhy.com/EN/Y2019/V36/I2/60

[1]	GB/T 21699-2008直线明槽中的转子式流速仪检定/校准方法[S].
[2]	姚永熙.国内外转子式流速仪检定方法分析[J].水文,2012,32(03):1-5,92.
[3]	张龙,叶松,周树道,等.小型轻便式流速仪检定系统设计[J].计算机测量与控制,2017,25(12):34-38.
[4]	秦平,陈鲁疆,王沛云.一种新型便携式旋桨流速仪[J].海洋技术,2009,28(01):37-40.
[5]	文华,朱玉琛,付广.流速仪在国内外的研究现状[J].舰船防化,2007,(03):43-45.
[6]	熊鳌魁,詹德新,楼宇娟.关于转子式流速仪两个问题的探讨[J].武汉交通科技大学学报,1995,19(02):215-217.
[7]	刘颖.现代润滑技术在煤矿机械设备的应用[J].煤炭技术,2013,32(02):12-13.
[8]	张景河.润滑油技术新发展及其对产品质量监督的要求[J].石油工业技术监督,2001,17(04):6-14.
[9]	刘长城,姜旭峰,宗营.润滑油的分类及选用[J].广东化工,2017,44(01):55-56.
[10]	原富平.润滑管理与应用(三) 第二讲工业润滑剂的分类、性能及应用简介[J].设备管理与维修,2007,(04):57-59.
[11]	GB/T 498-2014石油产品及润滑剂分类方法和类别的确定[S].
[12]	GB/T 7631-2008润滑剂、工业用油和有关产品(L类)的分类[S].
[13]	GBT 7631.13-1995润滑剂和有关产品(L类)的分类第13部分:A组(全损耗系统)[S].
[14]	GB 443-89L-AN全损耗系统用油[S].
[15]	GB-T3141-1994工业液体润滑剂 ISO粘度分类[S].
[16]	邵健群.润滑管理与应用(六) 第五讲链条的润滑与维护[J].设备管理与维修,2007,(07):59-60.
[17]	陈晓颖,王晓蕾,慕新仓.军用地面气象仪器与检定[M].北京:解放军出版社,2003.
[18]	李伟,贺晓蕾,齐久成.气象仪器及测试技术[M].北京:气象出版社,2010.
[19]	罗丽,王晓蕾,余鹏.饱和水汽压计算公式的比较研究[J].气象水文海洋仪器,2003,20(04):24-27.
[20]	杨汉塘.论我国转子式流速仪技术改进与管理创新[J].水利水文自动化,2002,(02):1-3,6.