|
|
Balloon design and falling point prediction of engineering device by balloon flying in the stratosphere |
Li Xuesong, Yin Juan, Wang Yaqi |
Sichuan Meteorological Observation Data Center,Chengdu 610072 |
|
|
Abstract The high-altitude detection technology uses sounding balloons to bring the detector into the high-altitude measurement,but the recovery of the detector has the problem of too large search range.After designing the sounding balloon and establishing the falling point prediction model of the ball borne device,this paper compares it with the actual case of launching the sounding balloon to explore the enforceability of the design and model.By putting the prediction model into practice,the azimuth error is 4.2% and the radial distance error is 1.4%,which greatly reduces the search range and the difficulty of equipment recovery.
|
Received: 31 March 2022
|
|
|
|
|
[1] |
孙克敏,闻福成.如何提高探空气球的飞升高度[J].吉林气象,2006(2):45.
|
[2] |
薛邦贵,刘永强,马良,等.高空探测气球施放高度因素探讨[J].气象水文海洋仪器,2021,38(3):61-63.
|
[3] |
和翠英.浅谈如何提高探空气球的探测高度[J].气象水文海洋仪器,2012,29(4):66-68.
|
[4] |
刘清芳,乔玉新,孙克敏,等.影响探空气球探测高度的因素分析[J].气象水文海洋仪器,2012,29(1):28-30,56.
|
[5] |
张黔,柯莉萍,李蜀黔,等.如何提高探空气球的施放高度[J].贵州气象,2007(5):35,43.
|
[6] |
陈哲.中国探空气球水平漂移总体特征分析[J].气象,2010,36(2):22-27.
|
|
|
|