基于“云+端”的雨量现场校准系统设计

Abstract
Figure/Table
References
Related Citation (15)

Download: HTML (1 KB)
Export: BibTeX | EndNote (RIS)

Abstract A rainfall on-site calibration system based on embedded technology and Internet of Things technology has been designed,consisting of a provincial-level rainfall calibration management platform on the cloud end,a rainfall calibration communication module,and a JJS1 type tipping bucket rain sensor calibrator.The system can measure the rainfall count of the rain sensor and use 4G+MQTT protocol to connect real-time data transmission and management for verification between provinces and cities.The verification results are uniformly judged and fed back in real time by the "cloud" end,avoiding the influence of improper operation by business personnel.This system can effectively improve the efficiency,real-time performance,and quality of rainfall observation data in on-site calibration work.In addition,provincial-level business management departments can use the provincial-level rainfall calibration management platform to real-time understand the calibration status of various stations and improve their business management capabilities.This technical solution is economically reliable and has the potential for promotion,which will help improve the management mode of graded meteorological equipment calibration at the provincial,regional,and station levels.

Key words： rainfall measurement and verification equipment maintenance Internet of Things

Received: 11 December 2023

ZTFLH:

P414.9+1

	Service

	E-mail this article
	Add to my bookshelf
	Add to citation manager
	E-mail Alert
	RSS
	Articles by authors
	Zou Qingbiao
	Huang Feilong
	Li Xindi

Cite this article:

Zou Qingbiao,Huang Feilong,Li Xindi. Design of rainfall gield calibration system based on CloudTerminal[J]. Meteorological Hydrological and Marine Instrument, 2024, 41(6): 111-114.

URL:

http://www.qxswhy.com/EN/ OR http://www.qxswhy.com/EN/Y2024/V41/I6/111

[1]	袁靖凯,苏慧君,郑礼灿.区域自动气象站雨量传感器故障成因分析[J].海峡科学,2021(9):46-48,60.
[2]	中国气象局.自动气象站数据采集器现场校准方法:QX/T 291-2015[S].北京:中国气象出版社,2011.
[3]	张毅,梁艳,张楠,等.计量检定全过程智慧监管探索[J].中国计量,2021(11):24-26.
[4]	谭晗凌,邹庆彪,黄飞龙,等.一种温度传感器智能检定系统的设计及应用[J].广东气象,2022,44(6):65-67,72.
[5]	雷莹,陆扬,李迪,等.气压传感器智能检定系统研究和实现[J].科学技术创新,2022(25):37-40.
[6]	崔学林,梁宝龙,黄斌,等.基于串口服务器的智能温度检定系统设计[J].电子测量技术,2018,41(13):74-78.
[7]	胡敏哲.基于物联网的自动气象信息采集设计及仿真分析[J].科技创新与应用,2023,13(11):115-118.
[8]	李臣辉,王祖良.基于物联网技术的气象监测系统设计[J].物联网技术,2022,12(5):44-45,51.
[9]	王风硕,曾丽.基于MQTT协议的物联网平台设计与实现[J].电脑知识与技术,2023,19(25):73-76.
[10]	方丽,孙丘宁,王军,等.JJS1型翻斗雨量传感器校准仪[J].气象水文海洋仪器,2007,24(3):7-8.
[11]	丛郁,孙文良,刘文奇,等.JJS1型翻斗雨量传感器校准仪出厂自动检定系统[J].气象水文海洋仪器,2009,26(3):182-184.
[12]	谭晗凌,邹庆彪,黄飞龙,等.嵌入式自动气象站智能维修终端的开发及应用[J].广东气象,2022,44(3):82-84,96.